Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

netstat

Description

Displays the routing table and the current connections.

To use this subcommand, you must have the Execute Diagnostic Commands permission.

Synopsis

racadm netstat

Input

racadm netstat

Output

Kernel IPv6 routing table
                                                Destination                                 Next Hop                                Flags Metric Ref    Use Iface
                                                ::1/128                                     ::                                      U     0      30       1 lo
                                                fe80::200:ff:fe00:d01/128                   ::                                      U     0      0        1 lo
                                                fe80::/64                                   ::                                      U     256    0        0 eth1
                                                ff00::/8                                    ::                                      U     256    0        0 eth1
                                                
                                                
                                                Kernel IP routing table
                                                Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
                                                192.168.161.0   0.0.0.0         255.255.255.0   U         0 0          0 bond0
                                                0.0.0.0         198.168.161.1   0.0.0.0         UG        0 0          0 bond0
                                                
                                                
                                                Active Internet connections (w/o servers)
                                                Proto Recv-Q Send-Q Local Address           Foreign Address         State
                                                tcp        0      0 127.0.0.1:8195          127.0.0.1:52887         ESTABLISHED
                                                tcp        0      0 127.0.0.1:199           127.0.0.1:52174         ESTABLISHED
                                                tcp        0      0 127.0.0.1:52175         127.0.0.1:199           ESTABLISHED
                                                tcp        0      0 127.0.0.1:199           127.0.0.1:52175         ESTABLISHED
                                                tcp        0      0 192.168.155.10:22       192.168.155.20:45106    ESTABLISHED
                                                tcp        0      0 127.0.0.1:52174         127.0.0.1:199           ESTABLISHED
                                                tcp        0      0 127.0.0.1:52887         127.0.0.1:8195          ESTABLISHED
                                                
                                             

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\