Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

PDF

getniccfg

Description

Displays the current NIC settings.

Synopsis 

racadm getniccfg

Input 

racadm getniccfg
racadm getniccfg –m <module>

where –m must be one of the following values:


                                             
                                             
                                                
                                             
                                             
    
                                                
  • 
                                                   
    chassis  
    
                                                   : default
                                                   state if -m is not specified
                                                
    • 
                                                
                                                
  • 
                                                   
     server-n 
    
                                                   : where
                                                   n = 1 to 4
                                                
    • 
                                                
                                                
  • 
                                                   
    switch-n 
    
                                                   : where
                                                   n = 1 or 2
                                                
    • 
                                                
                                             

                                             
                                          		
                                          
                                       

                                       
                                       

                                          
                                             

                                                Example
                                             

                                             
                                          		
                                          
                                          
                                             

                                                racadm getniccfg
                                             

                                             
                                             
NIC Enabled = 1

                                             
                                             
IPv4 Enabled
                                                = 1
                                             

                                             
                                             
DHCP Enabled = 1

                                             
                                             
Static
                                                IP Address = 192.168.0.120
                                             

                                             
                                             
Static Subnet Mask
                                                = 255.255.255.0
                                             

                                             
                                             
Static Gateway = 192.168.0.1

                                             
                                             
Current IP Address = 192.168.0.12

                                             
                                             
Current Subnet Mask = 255.255.254.0

                                             
                                             
Current Gateway
                                                = 192.168.0.1
                                             

                                             
                                             
IPv6 Enabled = 0

                                             
                                             
Autoconfiguration Enabled = 1

                                             
                                             
Static IPv6 Address
                                                = ::/64
                                             

                                             
                                             
Static IPv6 Gateway = ::

                                             
                                             
Link Local Address = ::

                                             
                                             
Current IPv6 Address
                                                1 = ::
                                             

                                             
                                             
Current IPv6 Gateway = ::

                                             
                                             
Speed = Autonegotiate

                                             
                                             
Duplex = Autonegotiate

                                             
                                             
VLAN Enable = 0

                                             
                                             
VLAN ID = 1

                                             
                                             
VLAN priority = 0

                                             
                                             

                                                racadm
                                                   getniccfg -m server-1
                                                
                                             

                                             
                                             
LOM Model Name
                                                = BRCM 10GbE 2P 57810s bNDC
                                             

                                             
                                             
LOM Fabric Type =
                                                10 GbE KR
                                             

                                             
                                             
IPv4 Enabled = 1

                                             
                                             
DHCP Enabled = 1

                                             
                                             
IP Address = 192.168.0.18

                                             
                                             
Subnet Mask = 255.255.255.0

                                             
                                             
Gateway = 192.168.0.1

                                             
                                             
IPv6 Enabled = 0

                                             
                                             
Autoconfiguration Enabled = 0

                                             
                                             
Link
                                                local Address =
                                             

                                             
                                             
IPv6 Gateway = ::

                                             
                                             
VLAN Enable = 0

                                             
                                             
VLAN ID = 1

                                             
                                             
VLAN priority = 0

                                             
                                             

                                                racadm getniccfg -m
                                                   switch-1
                                                
                                             

                                             
                                             
DHCP Enabled = 1

                                             
                                             
IP Address = 192.168.0.12

                                             
                                             
Subnet Mask
                                                = 255.255.255.0
                                             

                                             
                                             
Gateway = 0.0.0.0

                                             
                                          		
                                          
                                       

                                       
                                    
                                    
                                 

                                 
                              

                              
                              

                                 Output
                              

                              
                              
The 
                                 getniccfg subcommand displays an appropriate error message if
                                 the operation is not successful. Otherwise, the output is displayed
                                 in the following format: 
                              

                              
                              
NIC Enabled               = 1
                                 IPv4 Enabled              = 1
                                 DHCP Enabled              = 1
                                 Static IP Address         = 192.168.0.120
                                 Static Subnet Mask        = 255.255.255.0
                                 Static Gateway            = 192.168.0.1
                                 Current IP Address        = 10.94.225.212
                                 Current Subnet Mask       = 255.255.255.128
                                 Current Gateway           = 10.94.225.129
                                 IPv6 Enabled              = 0
                                 Autoconfiguration Enabled = 1
                                 Static IPv6 Address       = ::/64
                                 Static IPv6 Gateway       = ::
                                 Link Local Address        = ::
                                 Current IPv6 Address 1    = ::
                                 Current IPv6 Gateway      = ::
                                 Speed                     = Autonegotiate
                                 Duplex                    = Autonegotiate
                                 VLAN Enable               = 0
                                 VLAN ID                   = 1
                                 VLAN priority             = 0
                                 $
                                 $ racadm getniccfg -m server-3
                                 LOM Model Name            = BRCM GbE 4P 5720 bNDC
                                 LOM Fabric Type           = Gigabit Ethernet
                                 IPv4 Enabled              = 1
                                 DHCP Enabled              = 0
                                 IP Address                = 0.0.0.0
                                 Subnet Mask               = 0.0.0.0
                                 Gateway                   = 0.0.0.0
                                 IPv6 Enabled              = 0
                                 Autoconfiguration Enabled = 1
                                 Link local Address        =
                                 IPv6 Gateway              = ::
                                 VLAN Enable               = 0
                                 VLAN ID                   = 1
                                 VLAN priority             = 0
                              

                              
                           

                           
                        

                        
                     

                     
                  

               

               

               
            

            
         

      

   



                    
                    

                    

                        

                            

                                

                                    

    

        

            
Rate this content

            

                

                    
                    
                    

                        

                            

                                 Accurate 
                                

                                    

                                        

                                        

                                        

                                        

                                        

                                    

                                

                            

                        

                        

                            

                                

                                    Useful
                                    

                                        

                                        

                                        

                                        

                                        

                                    

                                

                            

                        

                        

                            

                                

                                    Easy to understand
                                    

                                        

                                        

                                        

                                        

                                        

                                    

                                

                            

                        

                        

                            

                                Was this article helpful?
                                

                                    
                                

                                

                                    
                                

                            

                        

                    

                    

                        
                        
                        
0/3000 characters

                    

                    

                        

                            

                        

                    

                    

                        

                            
                            
                        

                    

                

            

            

                

                    

                        
                    

                

            

        

    





                                    

                                        

                                            

                                                
                                            

                                        

                                    

                                

                            

                        

                

            

        

    

        
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).

        
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.

        
  Comments cannot contain these special characters: <>()\