Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

Displays the current software version, model and generation information, and whether the target device can be updated.

• racadm getversion
• racadm getversion [-b | -c] [-m < module>]
• racadm getversion -l [-m < module>] [-f < filter>]

• (none) — Displays the version information for all targets or devices.

  <Server>    <iDRAC Version>        <Blade Type>           <Gen>   	 <Updatable>
                                                        server-1a   2.15.15.15 (18)        PowerEdge FC430        iDRAC8       Y
                                                        server-1b   2.40.40.40 (13)        PowerEdge FC430        iDRAC8       Y
                                                        server-1c   2.10.10.10 (49)        PowerEdge FC430        iDRAC8       Y
                                                        server-1d   2.40.40.40 (13)        PowerEdge FC430        iDRAC8       Y
                                                        server-3a   2.10.10.10 (27)        PowerEdge FC430        iDRAC8       Y
                                                        server-3b   2.10.10.10 (49)        PowerEdge FC430        iDRAC8       Y
                                                        server-3c   2.30.30.30 (10)        PowerEdge FC430        iDRAC8       Y
                                                        server-3d   2.10.10.10 (49)        PowerEdge FC430        iDRAC8       Y
                                                     

  <Switch>   	<Model Name>                      <HW Version>     <FW Version>
                                                        switch-1    1GBE PASS-THROUGH MODULE           A00              N/A
                                                     

  <CMC>       	<CMC Version>                                        <Updatable>
                                                        cmc         	2.00.000.20161003sahu                                     Y
                                                     

  <Chassis Infrastructure>         <FW Version>             <FQDD>
                                                        Main Board                       1.20.A00.201502058       System.Chassis.1#Infra                                         
                                                        structure.1
                                                     

• -b — Displays the server's current BIOS version (default is iDRAC version).
• -c — Displays the server's current CPLD version.
• -l — Displays the firmware versions Lifecycle Controller components.
• -f < filter > — Filters the components. Must be used with -1 and be one of the following values:
  • bios: BIOS
  • idrac: iDRAC
  • usc: Unified Server Configurator (Lifecycle Controller)
  • diag: 32-bit Diagnostics
  • drivers: OS Driver Package
  • nic-x: Network Interface card. See -l output for possible values of x.
• -m < module > — Specifies the module or device for which you must retrieve the version information.
  < module > is one of the following:

  • server- n , where n = 1 to 4.
  • switch- n , where n = 1 to 2.
  • CMC
  • mainboard

• Retrieve the version for a server 4

  racadm getversion -m server-4

• Retrieve the Lifecycle Controller component versions for servers 1 and 3:

  racadm getversion -l -m server-1 -m server-3

• Retrieve the Lifecycle Controller BIOS versions for servers 1 and 3:

  racadm getversion -l -m server-1 -m server-3 -f bios

• Retrieve the version for all modules:

  racadm getversion

• Retrieve the iDRAC version in all the servers that are attached to the chassis:

  racadm getversion -f idrac