Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

Displays the name, host name, and iDRAC DNS name of all the four slots, or of a specified slot (indicated by the slot number) in the chassis. Optionally, use this command to find if the slot name or host name, or iDRAC DNS name is displayed in the CMC web interface, or with the getslotname [-i < slotNum> | -h] command. If the host name is not available, the static slot name is used.

To use this subcommand, you must have CMC Login User privilege.

• racadm getslotname
• racadm getslotname [-i < slotNum> | -h]
• racadm getslotname -h

• None -

  Displays the slot name for all the four slots in the chassis.

• -i < slotNum > - specifies the slot number.

  Values: 1 to 4

• -h - Specifies whether to display the slot name, iDRAC DNS name, or the host name (if available). The values are:
  • 0 — Displays the slot name
  • 1 — Displays the host name instead of the slot name
  • 2 — Displays the iDRAC DNS name instead of the slot name

• Display all slots names.

  racadm getslotname

  <
                                                        Slot #> <
                                                        Slot Name>      <
                                                        Host name>	<iDRAC DNS Name>
                                                        1       		SLOT-01
                                                        2       		Webserver01     			 WXP-8GRB221
                                                        3       		Webserver3      			 WXP-319QWEecet5
                                                        4       		SLOT-04
                                                        
                                                     

• Display the name of the third slot.

  racadm getslotname -i 3

• Verify if the option ‘0’ is set for displaying the slot name.
• Verify if the option ‘1’ is set for displaying the host name.
• Verify if the option ‘2’ is set for displaying the iDRAC DNS name.