Dell Chassis Management Controller Version 2.0 for PowerEdge FX2 and FX2s RACADM CLI Guide

Description

Connects, disconnects, or deploys a media file on a remote server.

To use this subcommand, you must have the Administrator permission.

Synopsis

• racadm remoteimage [-m <module> | -a]

• racadm remoteimage -d -m <module>

• racadm remoteimage -d -a

• racadm remoteimage -s [-m <module> | -a]

• racadm remoteimage -c -m <module> -u <username> -p <password> -l <image_path>

• racadm remoteimage -c -a -u <username> -p <password> -l <image_path>

• racadm remoteimage -e -m module -u <username> -p <password> -l <image_path>

• racadm remoteimage -e -a -u <username> -p <password> -l <image_path>

Input

• -c — Connect a remote image.
• -d — Disconnect the remote image.
• -e — Deploys a remote image
• -s — Display the connection status; –a is assumed, if not specified.
• -m < module> — The <module> option can have the following values:
  • server-<n>, where n=1–4
  • server-<nx>, where n=1–4 and x=a-d (lower case)
• -u — Username to access the network share.
• -p — Password to access the network share.
• -l — Image location on the network share; use double quotation marks with a location.

Example

• racadm remoteimage -c -u "user" -p "pass" -l //shrloc/foo.iso 

  Remote Image is now Configured.

• racadm remoteimage -d 

  Disable Remote File Started. Please check status using -s option to verify if the Remote File Share is ENABLED or DISABLED.

• racadm remoteimage -s

  Remote File Share is Enabled.

  UserName

  Password

  ShareName //192.168.0.1/xxxx/dtk_3.3_73_Linux.iso