Dell D7523QT Monitor Usage and Troubleshooting Guide

Summary: This article provides information about how to set up and use the Dell D7523QT monitor. Learn how to troubleshoot common display or video issues with the Dell D7523QTX monitor.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Dell D7523QT product image

Quick Links

Getting Started with your Dell D7523QT Monitor Dell D7523QT Monitor Setup, Specifications and Service Manual Dell Drivers & Downloads Warranty and Support Services Frequently Asked Questions
|

The key features of the Dell D7523QT monitor are:

  • 189.28 mm (74.52 in.) viewable area display (measured diagonally), 3840 x 2160 resolution (16:9 aspect ratio), plus full-screen support for lower resolutions.
  • Built-in Speaker (2 x 12 W).
  • Video Electronics Standards Association (VESA) 600 mm x 400 mm mounting holes for flexible mounting solutions.
  • Plug-and-play capability if supported by your computer.
  • Digital connectivity with DisplayPort and HDMI.
  • On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
  • Security-lock slot (cable lock optional purchase).
WARNING: The possible long-term effects of blue light emission from the monitor may damage your eyes, including eye fatigue or digital eye strain. The ComfortView feature is designed to reduce the amount of blue light that is emitted from the monitor to optimize eye comfort.
WARNING: Do not mount this monitor in vertical orientation due to the risk of damaging the monitor.

This section provides some technical specifications of the Dell D7523QT monitor. For more information, see the user manual of the Dell D7523QT monitor.

Table 1: Technical specifications of the Dell D7523QT monitor.
Screen type Active matrix - TFT LCD
Panel technology In-Plane Switching
Maximum resolution 3840 x 2160 at 60 Hz
Viewing angle Horizontal 178° (typical)
Vertical 178° (typical)
Contrast ratio 1200:1 (typical)
Response time 8 ms typical (Grey to Grey)
Color gamut 72% National Television Standards Committee (NTSC)
NOTE: Color gamut (typical) is based on CIE1976 (82%) and CIE1931 (72%) test standards.
Color depth 1.07 billion colors (8bit+FRC)
Ports and connectors
  • 3 x HDMI 2.0 connector
  • 1 x DP 1.2 connector
  • 3 x USB-A 3.1 Gen 1 downstream ports
  • 2 x USB-A 2.0 downstream ports
  • 1 x USB-B 3.1 Gen 1 upstream port
  • 1 x RJ45 or Ethernet connector

For the best viewing experience, mount on the wall, connect and organize the cables, and set up the monitor ergonomically.

Wall mounting

VESA screw hole dimension
Figure 1: VESA screw hole dimension

See installation instruction that comes with the third-party wall mount. VESA-compatible base mounting kit (600 x 400mm ).

NOTE: Do not attempt to wall-mount the monitor by yourself. It should be installed by qualified installers.
  1. Install a wall plate on the Wall.
  2. Place the monitor panel on a soft cloth or cushion on a stable flat table.
  3. Attach the mounting brackets from the wall mounting kit to the monitor.
  4. Install the monitor to wall plate.
  5. Ensure that monitor is mounted vertically with no tilt forward or backward and a leveler is used to assist to mount the monitor.

Remote Control

Dell D7523QT Remote Control all button functions
Figure 2: Dell D7523QT Remote Control

Table 2: Buttons on the Dell D7523QT Remote Control.
Button Function Description
1 Power on/Standby Power on the computer or go into Standby mode.
2 Input source Select input source. Press Button 3 or Button 5 to select from HOME, HDMI1, HDMI2, HDMI3, DP. Press Button 12 to confirm and exit.
3 Up Press to move the selection up in the Settings menu.
4 Left Press to move the selection left in the Settings menu.
5 Down Press to move the selection down in the Settings menu.
6 Menu Press to turn on the Settings menu.
7 Decrease Brightness Press to decrease the Brightness.
8 Decrease Volume Press to decrease the Volume.
9 Mute Press to turn the mute function on/off.
10 Home Launcher Go to Home Launcher.
11 Right Press to move the selection right in the Settings menu.
12 OK Confirm an entry or selection.
13 Back button Return to the previous menu page or exit the current function.
14 Increase Brightness Press to increase the brightness.
15 Increase Volume Press to increase the volume.

Operating range of the remote control

Point the top of the remote control toward the LCD monitor’s remote sensor during button operation.

Use the remote control within a distance of about 8 m from the remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 5.6 m.

NOTE: The remote control may not function properly when the remote control sensor on the monitor is under direct sunlight or strong illumination, or when there is an obstacle in the path of signal transmission.

Connecting your monitor to the computer

To connect your Dell D7523QT monitor to your computer:

WARNING: Read and follow Safety Precautions When Working with Electronic and Electrical Equipment.
  1. Turn off the computer.
  2. Connect the power cable to the monitor.
  3. Connect the video cable (DisplayPort, or HDMI) between the computer and the monitor.
    NOTE: Setting up the monitor with a Dell docking station? Learn How to Connect and Set Up a Docking Station With a Dell Laptop.
    NOTE: Setting up more than one monitor? Learn How to Set up Multiple Monitors or see the user manual of the Dell D7523QT monitor.
  4. Connect the USB upstream cable between the monitor and computer (if available).
  5. Turn on the monitor.
  6. Turn on the computer.

For additional product-specific information, see the user manual of the Dell D7523QT monitor.

Dell D7523QT monitor orientation must always be in landscape mode. This includes any wall-mounted monitors, monitors on a stand, or a monitor arm. In a multiple monitor setup, the Dell D7523QT should not be rotated either to 180° (landscape) or 90° (portrait).

CAUTION: Dell D7523QT setup must comply with the recommended panel orientation and working angle only. Setting up the monitor in an orientation that is not recommended may damage the monitor and/or cause a safety hazard.
NOTE: This is applicable for a monitor with a stand. When any other stand is bought, see the respective stand setup guide.

With the stand that is attached to the monitor, you can tilt and swivel the monitor for the most comfortable viewing angle.

When mounted on the wall or on a monitor arm, the setup must comply with the recommended panel orientation and working angle.

Use the buttons on the monitor or remote control to access the on-screen display (OSD) menu of the monitor.

To learn more about navigating through the on-screen display (OSD) menu, see the Dell D7523QT Monitor User's Guide at Dell D7523QT Monitor Manuals and Documents.

NOTE: Any changes that you make are automatically saved. Whenever you move to another menu item, exit the OSD menu, or wait for the OSD menu to automatically close.

Front Panel Buttons on the Dell D7523QT monitor
Figure 3: Dell D7523QT front panel buttons.

Table 3: Buttons on the Dell D7523QT monitor.
Button Function
Button 1 Energy saving mode, turn off the backlight
Button 2 Open Settings
Button 3 Audio mute on/of
Button 4 Decrease audio output value
Button 5 Increase audio output value
Button 6 Return to the previous menu page.
Button 7 Home Launcher
Button 8 Power on the display or enter standby mode.
NOTE: The power key cannot be trigger continually within 5 seconds.

Resetting a monitor to factory defaults can help resolve many video or display-related issues. To reset your Dell D7523QT monitor to factory default settings:

  1. Press Button 2 on the front panel to open Settings.
  2. Go to System.
  3. Go to Factory reset.
  4. Select Reset.

Front Panel Buttons on the Dell D7523QT monitor
Figure 4: Dell D7523QT Front Panel Buttons.

During the LCD manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. Such pixel issues are hard to see and do not affect the display quality or usability. Learn more about Dell LCD Monitor Pixel Guidelines.

The following table contains information about troubleshooting common display-related issues on your Dell D7523QT monitor.

WARNING: The monitor LCD panel duty cycle is designed for 12 hours a day, 7 days a week. Usage higher than the designed duty cycle may result in premature decrease in panel backlight luminance, which may not be covered under warranty.

Alternatively, learn How to Troubleshoot Display or Video Issues on a Dell Monitor or check our Dell monitor self-help guide.

Table 3: Troubleshooting common display issues on Dell D7523QT monitor.
Common Problem Possible Solution
No Video - Power LED Off
  • Ensure that the power cable connecting to the monitor is properly connected and secure.
  • Verify that the power outlet is functioning properly by using any other electrical equipment.
  • Ensure that the power button is pressed fully.
  • Test with a known-good cable and a known-good computer if possible.
No Video - Power LED On
  • Increase the brightness and contrast of the monitor using the On-Screen Display (OSD) menu.
  • Check for bent or broken pins in the video cable connector.
  • Reseat both ends of the video cable.
  • Try with a known-good video cable.
  • Ensure that the correct input source is selected using the Input Source menu.
  • Test the monitor with a known-good computer if available.
Poor Focus
Shaky or Jittery Video
Missing Pixels
  • Turn off the monitor and then turn on the monitor after a few minutes.
  • Pixel that is permanently off is a natural defect that can occur in LCD technology.
Stuck On/Off Pixels
  • Turn off and then turn on the monitor.
  • A few permanently bright or dark pixels are considered normal by industry standards. The exact number of pixels that are allowed varies depending on the monitor. See the Dell LCD Monitor Pixel Guidelines for more details.
Brightness Problems
Geometric Distortion
NOTE: When using DisplayPort input, the positioning adjustments are not available.
Horizontal or Vertical Lines
NOTE: When using DisplayPort input, the positioning adjustments are not available.
Synchronization Problems
Safety-Related Issues
Intermittent Problems
Missing Color
  • Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
  • Check for bent or broken pins in the video cable connector.
Screen image is too small.
Cannot adjust the monitor with the buttons on the back of the panel.
  • Turn off the monitor.
  • Unplug the power cable.
  • Plug the power cable back.
  • Turn On the monitor.
No Input Signal when user controls are pressed.
  • Check the signal source. Ensure that the computer is not in power-saving mode by moving the mouse or pressing any key on the keyboard.
  • Ensure that the video cable is connected properly with the monitor and the computer.
  • Restart the computer.
The picture does not fill the entire screen.
  • Due to different video formats (aspect ratio) of DVDs and videos, the monitor may display on the screen.

Frequently Asked Questions

For more information, click to expand a section below.

NOTE: If you do not see the recommended resolution as an option, update the video card (GPU) driver of your Dell computer from https://www.dell.com/support/drivers or the video card (GPU) manufacturer's website. Learn How to Download and Install Dell Drivers.

Using Windows Display Settings

In Windows 11, Windows 10, Windows 8 or 8.1, and Windows 7:

  1. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to the classic desktop view.
  2. Right-click the desktop and click Screen Resolution.
  3. Click the dropdown list of the Screen Resolution and select 3840 x 2160.
  4. Click OK.

Using NVIDIA Control Panel

To change the resolution using the NVIDIA Control Panel:

  1. Right-click the desktop and click NVIDIA Control Panel.
  2. Click the + symbol next to Display on the left pane.
  3. Select Change Resolution under Display.
  4. In the dropdown menu on the right pane, select the resolution 3840 x 2160.
  5. Click Apply.

Using AMD Catalyst Control Center

To change the resolution using the AMD Catalyst Control Center:

  1. Right-click the desktop and click AMD Catalyst Control Center.
  2. Click the + symbol next to Display on the left pane.
  3. Select Change Resolution under Display.
  4. In the dropdown menu on the right pane, select the resolution 3840 x 2160.
  5. Click Apply.

DisplayNote supports both the DisplayNote Montage and DisplayNote Broadcast applications directly.

To contact DisplayNote for technical support, go to DisplayNote Technical SupportThis hyperlink is taking you to a website outside of Dell Technologies. and DisplayNote Support CenterThis hyperlink is taking you to a website outside of Dell Technologies..

The troubleshooting section of this article provides information about troubleshooting common issues with your Dell D7523QT monitor.

This section has troubleshooting steps on how to resolve power issues, video issues, color or clarity issues, distortion issues, horizontal or vertical lines, brightness issues or pixel issues, and so on.

Learn how to access the on-screen display (OSD) menu on the Dell D7523QT monitor. For additional product-specific information, see the user manual of the Dell D7523QT monitor.

Information about the monitor such as the model number, firmware version, and Service Tag can be accessed using the on-screen display (OSD) menu of the monitor.

Learn how to access the on-screen display (OSD) menu on the Dell D7523QT monitor. For additional product-specific information, see the user manual of the Dell D7523QT monitor.

For information about the supported orientation to set up the Dell D7523QT monitor, see the monitor orientation section of this article.

Affected Products

Dell D7523QT
Article Properties
Article Number: 000200314
Article Type: How To
Last Modified: 23 Jul 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.