VCF 4.x 密碼管理顯示錯誤「密碼管理作業在預存階段失敗」

Summary: 本文說明在無法執行錯誤時,如何在 VCF 環境中執行密碼管理工作:「密碼管理作業在預先驗證階段失敗」

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

嘗試在 VCF 環境中執行密碼管理工作時,在「密碼管理」標籤上會顯示錯誤:「密碼管理作業在預先驗證階段失敗」,如下所示: 密碼管理作業在驗證前階段錯誤訊息失敗

Operations Manager 記錄還不夠最終結果,但在 SDDC Manager 資料庫中,可能會在隱藏表格中看到一些處於故障狀態的預先驗證舊工作。

若要驗證失敗的工作。您必須使用 SSH 連線至 SDDC Manager,然後連線至資料庫 Operations Manager:

1。Psql -h localhost -U postgres
2.連線至 Operations Manager 資料庫。
\c Operations Manager
3.列出密碼管理的預先驗證失敗工作。
從transaction_status=「PREVALIDATION_FAILED」的passwordmanager.password_operations中選取 *

Cause

資料庫中列出自動旋轉或密碼旋轉預先驗證工作失敗。 

Resolution

若要修正問題,請遵循以下步驟:

1.取得 SDDC Manager 的快照。
2.連線至 Database Operations Manager:
Psql -h localhost -U postgres
\c Operations Manager
3.從資料庫中刪除舊的預先驗證失敗工作:
從 passwordmanager.password_operations中刪除,其中 transaction_status='PREVALIDATION_FAILED';
4.前往 SDDC Manager Web 介面,然後按一下密碼管理標籤。如果任何過去未清理過的舊故障工作都會顯示。
5.按一下[Cancel] (取消),現在應該可以執行所有密碼管理工作。

Additional Information

這些解決方案步驟也應適用于較舊的 VCF 代碼。 

Affected Products

VMWare Cloud on Dell EMC VxRail E560F

Products

Converged Infrastructure, Hyper-converged Systems, VxRail
Article Properties
Article Number: 000212122
Article Type: Solution
Last Modified: 30 Jul 2024
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.