Installing the
keyboard assembly
NOTE: The keyboard and the
keyboard tray together is called the keyboard assembly.
- Align the keyboard assembly with the screw
holders on the computer.
- Tighten the screws that secure the keyboard
to the computer.
- Connect the keyboard cables to the connectors
on the touchpad board.
- Install the:
- system board
- dock frame
- WLAN card
- WWAN card
- memory module
- heat sink assembly
- power connector port
- coin cell battery
- SSD
- battery
- base cover
- Follow the procedure in After working inside
your system.
Data is not available for the Topic