Removing the
keyboard assembly
NOTE: The keyboard and the
keyboard tray together is called the keyboard assembly.
- Follow the procedure in Before working inside
your computer.
- Remove the:
- base cover
- battery
- SSD
- WLAN card
- WWAN card
- memory module
- heat sink assembly
- coin cell battery
- dock frame
- power connector port
- system board
- Peel the touchpad cable from the keyboard assembly [1].
- Disconnect the keyboard cables from the connectors
on the touchpad board [2, 3].
- Remove the screws that secure the keyboard
assembly to the computer [1].
- Lift the keyboard assembly from the computer
[2].
Data is not available for the Topic