Removing the
display assembly
- Follow the procedure in Before working inside
your computer.
- Remove the:
- base cover
- battery
- WLAN card
- WWAN card
- To remove the display hinge brackets:
- Remove the screw that secures the display
hinge bracket to the computer [1].
- Remove the display hinge bracket from the
computer [2].
- To disconnect the display assembly cable:
- Unroute the WLAN and WWAN cables from the
routing channel on the system board [1].
- Remove the screws that secure the display assembly cable
bracket to the computer [2].
- Remove the display assembly cable bracket
to access the display assembly cable [3].
- Disconnect the display assembly cable from
the system board [4].
- To disconnect the display assembly:
- Remove the screws that secure the display
assembly [1].
- Release the WWAN and WLAN cables and display
assembly cable from the slot on the computer [2].
- To remove the display assembly:
- Remove the screws that secure the display
assembly to the computer [1].
- Open the display assembly [2] and lift
the display assembly to remove it from the computer [3].
Data is not available for the Topic