Allows you to set, change, or delete the administrator
(admin) password.
NOTE: You must set the admin password before you set the system or hard
drive password. Deleting the admin password automatically deletes
the system password and the hard drive password.
NOTE: Successful password
changes take effect immediately.
Default setting:
Not set
System Password
Allows you to set, change or delete the system password.
NOTE: Successful password
changes take effect immediately.
Default setting:
Not set
Internal HDD-2 Password
Allows you to set, change, or delete the administrator
password.
NOTE: Successful
password changes take effect immediately.
Default
setting: Not set
Strong Password
Allows you to enforce the option to always set strong
passwords.
Default Setting: Enable Strong Password
is not selected.
NOTE: If Strong Password
is enabled, Admin and System passwords must contain at least one uppercase
character, one lowercase character and be at least 8 characters long.
Password Configuration
Allows you to determine the minimum and maximum length
of Administrator and System passwords.
Password Bypass
Allows you to enable or disable the permission to
bypass the System and the Internal HDD password, when they are set.
The options are:
Disabled
Reboot bypass
Default setting: Disabled
Password Change
Allows you to enable the disable permission to the
System and Hard Drive passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Changes
Allows you to determine whether changes to the setup
options are allowed when an Administrator Password is set. If disabled
the setup options are locked by the admin password.
TPM 1.2/2.0 Security
Allows you to enable the Trusted Platform Module (TPM)
during POST. The options are:
TPM On (enabled by default)
Clear
PPI Bypass for Enabled Commands
PPI Bypass for Disabled Commands
Disabled
Enabled
NOTE: To upgrade
or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
Computrace
Allows you to activate or disable the optional Computrace
software The options are:
Deactivate
Disable
Activate
NOTE: The Activate
and Disable options will permanently activate or disable the feature
and no further changes will be allowed
Default
setting: Deactivate
CPU XD Support
Allows you to enable the Execute Disable mode of the
processor.
Enable CPU XD Support (default)
OROM Keyboard Access
Allows you to set an option to enter the Option ROM
Configuration screens using hotkeys during boot. The options are:
Enable
One Time Enable
Disable
Default setting: Enable
Admin Setup Lockout
Allows you to prevent users from entering Setup when
an Administrator password is set.
Default Setting: Disabled
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\