Allows you to configure the integrated network controller.
The options are:
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Parallel Port
Allows you to configure the parallel port on the docking
station. The options are:
Disabled
AT: This option is enabled by default.
PS2
ECP
Serial Port
Allows you to configure the integrated serial port.
The options are:
Disabled
COM1: This option is enabled by default.
COM2
COM3
COM4
SATA Operation
Allows you to configure the internal SATA hard-drive
controller. The options are:
Disabled
AHCI
RAID On: This option is enabled by default.
Drives
Allows you to configure the SATA drives on board.
All drives are enabled by default. The options are:
SATA-1
M.2 PCI-e SSD-0
SATA-2
SMART Reporting
This field controls whether hard drive errors for
integrated drives are reported during system startup. This technology
is part of the SMART (Self Monitoring Analysis and Reporting Technology)
specification. This option is disabled by default.
Enable SMART Reporting
USB Configuration
This is an optional feature.
This
field configures the integrated USB controller. If Boot Support is
enabled, the system is allowed to boot any type of USB Mass Storage
Devices (HDD, memory key, floppy).
If USB port is enabled,
device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device
attached to this port.
The options are:
Enable USB Boot Support (by default enable)
Enable External USB Port (by default enable)
NOTE: USB keyboard
and mouse always work in the BIOS setup irrespective of these settings.
USB PowerShare
This field configures the USB PowerShare feature
behavior. This option allows you to charge external devices using
the stored system battery power through the USB PowerShare port.
Audio
This field enables or disables the integrated audio
controller. By default, the Enable Audio option is selected.
The options are:
Enable Microphone (by default enable)
Enable Internal Speaker (by default enable)
Keyboard Illumination
This field lets you choose the operating mode of the
keyboard illumination feature. The keyboard brightness level can be
set from 0% to 100%. The options are:
Disabled
Dim
Bright (enabled by default)
Keyboard Backlight with AC
The Keyboard Backlight with AC option does not affect
the main keyboard illumination feature. Keyboard Illumination will
continue to support the various illumination levels. This field has
an effect when the backlight is enabled.
Keyboard Backlight Timeout with AC
The Keyboard Backlight Timeout dims out with AC option.
The main keyboard illumination feature is not affected. Keyboard Illumination
will continue to support the various illumination levels. This field
has an effect when the backlight is enabled.
Keyboard Backlight Timeout on Battery
The Keyboard Backlight Timeout dims out with Battery
option. The main keyboard illumination feature is not affected. Keyboard
Illumination will continue to support the various illumination levels.
This field has an effect when the backlight is enabled.
Unobtrusive Mode
This option, when enabled, pressing Fn+F7 turns off
all light and sound emissions in the system. To resume normal operation,
press Fn+F7 again. This option is disabled by default.
Miscellaneous Devices
Allows you to enable or disable the following devices:
Enable Camera —enabled by default
SD Card Read Only —enabled by default
Enable Media Card
Disable Media Card
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\