Allows you to enable or disable the system setup (BIOS)
warning messages when you use certain power adapters.
Default setting: Enable Adapter Warnings
Keypad (Embedded)
Allows you to choose one of two methods to enable
the keypad that is embedded in the internal keyboard.
Fn Key Only: This option is enabled by default.
By Numlock
NOTE: When setup
is running, this option has no effect. Setup works in Fn Key Only
mode.
Mouse/Touchpad
Allows you to define how the system handles mouse
and touch pad input. The options are:
Serial Mouse
PS2 Mouse
Touchpad/PS-2 Mouse: This option is enabled by default.
Numlock Enable
Allows you to enable the Numlock option when the computer
boots.
Enable Network. This option is enabled by default.
Fn Key Emulation
Allows you to set the option where the Scroll Lock
key is used to simulate the Fn key feature.
Enable Fn
Key Emulation (default)
Fn Lock Options
Allows you to let hot key combinations Fn
+ Esc toggle the primary behavior of F1–F12, between their standard
and secondary functions. If you disable this option, you cannot toggle
dynamically the primary behavior of these keys. The available options
are:
Fn Lock. This option is selected by default.
Lock Mode Disable/Standard
Lock Mode Enable/Secondary
MEBx Hotkey
Allows you to specify whether the MEBx Hotkey function
should enable, during the system boot.
Default Setting:
Enable MEBx Hotkey
Fastboot
Allows you to speed up the boot process by bypassing
some of the compatibility steps. The options are:
Minimal
Thorough (default)
Auto
Extended BIOS POST Time
Allows you to create an additional preboot delay.
The options are:
0 seconds. This option is enabled by default.
5 seconds
10 seconds
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\