Removing the
system board
- Follow the procedure in Before working inside
your computer.
- Remove the:
- base cover
- battery
- memory module
- SSD
- dock frame
- WLAN card
- WWAN card
- heat sink assembly
- coin cell battery
- To remove the display assembly cable:
- Unroute the WWAN and WLAN cables [1].
- Remove the screws that
secures the display assembly cable bracket to the system board [2].
- Lift the display assembly cable bracket
from the computer [3].
- Disconnect the display assembly cable from
the computer [4].
- Disconnect
the speaker cable [1], coin cell battery cable [2], LED board cable,
touchpad cable [3, 4], and power connector port cable [5].
- To remove the system board:
- Remove the screws that secure the metal
bracket to the system board [1]
- Lift the metal bracket [2].
- Remove the screws that secure system board
to the computer [3].
- Lift the system board from the computer
[4].
Data is not available for the Topic