Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell EMC SmartFabric OS10 User Guide Release 10.5.1

PDF

NPG switch configurations

Enable NPG mode of operation 

OS10# show fc switch
Switch Mode : Disabled
Switch WWN :

OS10(config)# feature fc npg

OS10# show fc switch
Switch Mode : NPG
Switch WWN : 10:00:14:18:77:20:73:cf
OS10#

Create VLAN 

OS10(config)# interface vlan 100

Create vFabric 

OS10(config)# vfabric 100

OS10(conf-vfabric-100)# vlan 100

OS10(conf-vfabric-100)# name NPG_Fabric

OS10(conf-vfabric-100)# fcoe fcmap 0efc01

OS10(conf-vfabric-100)# exit

Apply vFabric and FC port-mode configuration on the interface that connects to FC end point (HBA) 

OS10(config)# interface range fibrechannel 1/1/9,1/1/10

OS10(conf-range-fc1/1/9,1/1/10)# vfabric 100

OS10(conf-range-fc1/1/9,1/1/10)# fc port-mode F

OS10(conf-range-fc1/1/9,1/1/10)# no shut

OS10(conf-range-fc1/1/9,1/1/10)# exit

Enable DCBx globally 

OS10(config)# dcbx enable
Create class map and policy map 
OS10(config)# class-map type network-qos cmap1

OS10(config-cmap-nqos)# match qos-group 3

OS10(config)# policy-map type network-qos pmap1

OS10(config-pmap-network-qos)# class cmap1

OS10(config-pmap-c-nqos)# pause

OS10(config-pmap-c-nqos)# pfc-cos 3

OS10(config-pmap-c-nqos)# exit
Disable LLFC on the interface that connects to FCoE end points (CNA) 
OS10(config)# interface range ethernet 1/1/54,1/1/55

OS10(conf-range-eth1/1/54,1/1/55)# no flowcontrol receive

OS10(conf-range-eth1/1/54,1/1/55)# exit
Apply service policy and enable PFC mode on the interface that connects to FCoE end point (CNA) 
OS10(config)# interface range ethernet 1/1/54,1/1/55

OS10(conf-range-eth1/1/54,1/1/55)# service-policy input type network-qos pmap1

OS10(conf-range-eth1/1/54,1/1/55)# priority-flow-control mode on

OS10(conf-range-eth1/1/54,1/1/55)# exit
Apply vFabric configuration on the interface that connects to FCoE end points (CNA) 
OS10(config)# interface range ethernet 1/1/54,1/1/55

OS10(conf-range-eth1/1/54,1/1/55)# vfabric 100

OS10(conf-range-eth1/1/54,1/1/55)# no shut

OS10(conf-range-eth1/1/54,1/1/55)# exit
Apply vFabric configuration on the FC upstream interfaces 
OS10(config)# interface range fibrechannel 1/1/1,1/1/2

OS10(conf-range-fc1/1/1,1/1/2)# vfabric 100

OS10(conf-range-fc1/1/1,1/1/2)# no shut

OS10(conf-range-fc1/1/1,1/1/2)# exit
Apply FCoE delay FCF advertisement configuration globally 
OS10(config)# fcoe delay fcf-adv 15

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\