Dell EMC SmartFabric OS10 User Guide Release 10.5.1

Your user account must have any one of the following privileges: System admin (sysadmin), security admin (secadmin), or network admin (netadmin).

1. Use the dir command to view the list of available severity profiles in the severity-profile:// partition.

   OS10# dir severity-profile
   Date (modified)       Size (bytes)  Name
   --------------------- ------------  ---------------
   2019-03-27T15:24:06Z  46741         default.xml
   2019-04-01T11:22:33Z  456           custom.xml
   

2. Copy one of the available severity profiles to a remote host.

   OS10# copy severity-profile://default.xml scp://username:password@a.b.c.d/dir-path/mySevProf.xml

3. Modify the .xml file with changes as required.

   NOTE: When you modify the xml file, you must select one of the following severities:

   • CRITICAL
   • MAJOR
   • MINOR
   • WARNING
   • INFORMATIONAL

   If you want OS10 to generate the event, set the Enable flag to true. To turn off event notification, set the Enable flag to false.

   If you enter invalid values, the event severity-profile command fails.

4. Copy the custom profile to the OS10 switch.

   OS10# copy scp://username:password@a.b.c.d/dir-path/mySevProf.xml severity-profile://mySevProf_1.xml

   When you copy the custom profile, you must update the name of the custom profile. You cannot use the same name as the default profile (default.xml) or the active profile (mySevProf.xml).

5. Apply the custom severity profile on the switch.

   OS10# event severity-profile mySevProf_1.xml

   NOTE: You must restart the switch for the changes to take effect.
6. Restart the switch.

   OS10# reload

7. Use the show event severity-profile command to view the custom profile that is active.

   OS10# show event severity-profile
   Severity Profile Details
   --------------------------------------------
   Currently Active     : default
   Active after restart : mySevProf_1.xml