Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell EMC SmartFabric OS10 User Guide Release 10.5.1

PDF

match

Configures match criteria for the QoS policy.

Syntax
match {cos cos-number | ip [access-group name name | dscp dscp-value [ecn ecn-value] | precedence value] | ip-any [dscp dscp-value [ecn ecn-value] | precedence value] | ipv6 [access-group name name | dscp dscp-value [ecn ecn-value] | precedence value] | mac access-group acl-name | not [cos | ip | ip-any | ipv6] | vlan vlan-id | protocol-or-application-name}
Parameters
  • cos cos—number — Enter a queue number for the CoS match criteria, from 0 to 7.
  • ip — Enter the IPv4 match criteria.
  • access-group name name — (Optional) Enter the IPv4 access-group name.
  • dscp dscp-value — (Optional) Enter a DSCP value for L3 DSCP match criteria, from 0 to 63.
  • ecn ecn-value — (Optional) Enter a ECN value for ECN bit match criteria, from 0 to 3.
  • precedence value — (Optional) Enter a precedence value for L3 precedence match criteria, from 0 to 7.
  • ip-any — Enter the IPv4 or IPv6 match criteria.
  • dscp dscp-value — (Optional) Enter a DSCP value for L3 DSCP match criteria, from 0 to 63.
  • ecn ecn-value — (Optional) Enter a ECN value for ECN bit match criteria, from 0 to 3.
  • precedence value — (Optional) Enter a precedence value for L3 precedence match criteria, from 0 to 7.
  • ipv6 — Enter the IPv6 match criteria.
  • access-group name name — (Optional) Enter the IPv6 access-group name.
  • dscp dscp-value — (Optional) Configure a DSCP value for L3 DSCP match criteria, from 0 to 63.
  • ecn ecn-value — (Optional) Enter a ECN value for ECN bit match criteria, from 0 to 3.
  • mac access-group name name — Enter an access-group name for the MAC access-list match criteria. A maximum of 140 characters.
  • dscp dscp-value — Enter a DSCP value for marking the DSCP packets, from 0 to 63.
  • not — Enter the IP or CoS to negate the match criteria.
  • vlan vlan-id — Enter a VLAN number for VLAN match criteria, from 1 to 4093.
  • protocol-or-application-name — Enter the name of the protocol or application that you want to move from one queue to another.
Default
Not configured
Command Mode
CLASS-MAP
Usage Information
In a match-any class, you can enter multiple match criteria. In a match-all class, if the match case is access-group, no other match criteria is allowed. If you attach the access-list to class-map type control—plane or qos, the access-list (IPv4, IPv6) ignores the permit and deny keywords.
Example 1 
OS10(conf-cmap-qos)# match ip access-group name ag1
OS10(config-cmap-qos)# match ipv6 access-group name ACLv6
Example 2 
OS10(config)# class-map type control-plane example-queue-remap
OS10(config-cmap-control-plane)# match vrrp
Supported Releases
10.2.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\