Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell Latitude E7270 Owner's Manual

Removing the display assembly

  1. Follow the procedure in Before working inside your computer .
  2. Remove the:
    1. base cover

    2. battery

    3. WLAN card

    4. WWAN card

  3. To remove the display hinge brackets:
    1. Remove the screw that secures the display hinge bracket to the computer [1].
    2. Remove the display hinge bracket from the computer [2].
    Figure displaying removing screws to remove hinge bracket.
  4. To disconnect the display assembly cable:
    1. Unroute the WLAN and WWAN cables from the routing channel on the system board [1].
    2. Remove the screw that secures the display assembly cable bracket to the computer [2].
    3. Remove the display assembly cable bracket to access the display assembly cable [3].
    4. Disconnect the display assembly cable from the system board [4].
    Figure displaying removing the display assembly cable.
  5. To disconnect the display assembly:
    1. Remove the screws that secure the display assembly [1].
    2. Release the WWAN and WLAN cables and display assembly cable from the slot on the computer [2].
    Figure displaying unrouting the displaying assembly cable.
  6. To remove the display assembly:
    1. Remove the screws that secure the display assembly to the computer [1].
    2. Open the display assembly [2] and lift the display assembly to remove it from the computer [3].
    Figure displaying removing display assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\