- Notes, cautions, and warnings
- About this document
- Next Generation Modular overview
- Enclosure overview
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your enclosure
- After working inside your enclosure
- Hot plug and Non-hot plug devices
- Storage and compute sleds
- Cooling fan modules
- Power supply units
- Fabrics and modules
- Removing a blank from Fabric A or B slot
- Installing a blank in Fabric A or B slot
- Removing a module from Fabric A or B slot
- Installing a module in Fabric A or B slot
- Removing a MX7000 blank from Fabric C slot
- Installing a MX7000 blank in Fabric C slot
- Removing a MX7000 module from Fabric C slot
- Installing a MX7000 module into Fabric C slot
- Removing a management module blank
- Installing a management module blank
- Removing a management module
- Installing a management module
- Installing the second management module
- Support information for GPU
- Technical specifications
- Getting help
- Documentation resources
Dell EMC PowerEdge MX7000 Enclosure Installation and Service Manual
LCD touch panel
The LCD touch panel (optional) is on the left control panel of your enclosure.
The
LCD touch panel displays the following options:
- System information
- System status
- Error messages
- QuickSync options - Available on the optional QuickSync LCD panel only.
NOTE:The
LCD touch panel is not a hot swappable module. Before you replace the module, power off the enclosure and disconnect the power from the chassis.
The
LCD touch panel enables you to scroll or swipe on the screen. The options available on the
LCD touch panel are:
- Welcome Screen - Enables you to select your native language and the default LCD home page.
- Main Menu - Enables you to access the LCD functionality such as Identify, Settings, QuickSync, Alerts, Help, and Powered off.
- QuickSync - Enables you to connect OpenManage Mobile to the enclosure.
- Alerts - Enables you to view a list of all the critical and warning alerts of the enclosure.
- Network Settings - View and configure the chassis management IP address.
- LCD Configuration - Enables you to configure the LCD options such as View and Modify, View only, Disabled, Present, and Not present.
- Settings - Enables you to edit the Network settings, LCD Language, and Home screen.
- Service Interaction - Displays the impact on drive mapping when a server or sled is replaced in the enclosure.
- System Info - Displays the Model number, Asset tag, and Service tag of the enclosure.
- Chassis Power Off - Enables you to perform a Shutdown or Graceful shutdown.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\