Remote Management Console에서 SED가 "보호되지 않음"으로 표시되는 Dell Data Protection Encryption 엔드포인트
Summary: 시스템에 Dell Data Protection | 암호화 클라이언트가 자체 암호화 드라이브와 함께 설치되고 SDE(System Data Encryption) 정책이 활성화되어 있는 경우 Dell Enterprise Server의 Remote Management Console에서 엔드포인트의 "엔드포인트 보호 상태"가 "보호되지 않음"으로 표시됩니다. ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
영향을 받는 제품:
- Dell 데이터 보호 | 자체 암호화 드라이브
Cause
그 이유는 Dell Data Protection | 암호화 클라이언트는 SED 드라이브를 탐지하면 SDE를 비활성화하도록 설계되었습니다. Dell Data Protection | Enterprise Server에 이 시스템에 대한 정책으로 SDE가 설정되어 있고, 디바이스 스윕 타임스탬프가 업데이트되지 않으며, 서버가 Protected 플래그를 설정하지 않습니다.
Resolution
Remote Management Console에서 이 엔드포인트의 다른 모든 상태 필드에는 올바른 정보가 있지만 SDE 시작 및 종료 스윕 시간 필드는 비어 있습니다.
CanApplySDE는 Dell Data Protection | 암호화 소프트웨어 클라이언트를 사용하여 SED 또는 FVE 정책이 실행 중이고 적용 중인지 확인합니다.
Shield가 SDE 정책을 올바르게 적용할 수 있는 경우 다음 줄이 표시됩니다.
CanApplySDE? - Yes (SED present = 0, FVE Provisioned = 0, FVE Decrypting = 0, Always Apply= 0, FVE Disks=0)
참고: SED가 탐지된 경우 SDE 정책 활성화에 대한 자세한 내용은 자체 암호화 드라이브가 있는 시스템에서 Dell Encryption Enterprise 또는 Dell Encryption Personal용 SDE 암호화를 활성화하는 방법을 참조하십시오.
지원 부서에 문의하려면 Dell Data Security 국제 지원 전화번호를 참조하십시오.
온라인으로 기술 지원 요청을 생성하려면 TechDirect로 이동하십시오.
추가 정보 및 리소스를 보려면 Dell 보안 커뮤니티 포럼에 참여하십시오.
Affected Products
Dell EncryptionArticle Properties
Article Number: 000129499
Article Type: Solution
Last Modified: 11 Apr 2024
Version: 8
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.