Pre-boot Authentication displays "Undefined video mode number: ***"

摘要: When a monitor is connected to an endpoint through the display port, or the mini display port, directly, or through the E-port replicator, an error may occur at Pre-boot Authentication (PBA). ...

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

Affected Products:

  • Dell Encryption
  • Dell Data Protection | Encryption
  • Dell Security Management Server
  • Dell Data Protection | Enterprise Edition
  • Dell Encryption Personal
  • Dell Data Protection | Personal Edition
  • Dell Data Protection | Security Tools v1.4.1 and Later

Affected Versions:

  • v8.4.1 and Later

When an external monitor is connected using either the display port or mini display port then the error Loading CredSED client PBA ….. Undefined video mode number: *** may occur at the PBA prompt.

Dell Data Protection | Encryption PBA video error message
Figure 1: (English Only) Dell Data Protection | Encryption PBA video error message

Note: The *** can be any three-digit number depending on the monitor and the connector.

原因

Not Applicable

解决方案

To work around this issue use the HDMI port, D-sub or DVI port rather than the display port to connect the external monitor.

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

受影响的产品

Dell Encryption
文章属性
文章编号: 000125056
文章类型: Solution
上次修改时间: 16 1月 2024
版本:  9
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。