Mainframe Enablers TimeFinder SnapVX and zDP 8.5 Product Guide

1. In the zDP Snapset Controller Display panel, enter the S line command to open the zDP VDG SnapSet Device panel:

   .  ------------------- zDP VDG SDM_VDG3         SnapSet Device -- Row 1 to 1 of 1  .
   .  Command===>                                                                     .
   .                                                                                  .
   .     CCUU  SDEV       CCUU  SDEV       CCUU  SDEV       CCUU  SDEV                .
   .  --------------------------------------------------------------------------      .
   .  _ 0827C 0003CC   _ 0827D 0003CD   _ ----- ------   _ ----- ------               .
   .  ******************************* Bottom of data ******************************** .
   

   1. The zDP VDG SnapSet Device panel lists storage system devices for the selected VDG.

      NOTE:For detailed information about each field, press PF1 to access help.
2. In the zDP VDG SnapSet Device panel, select the devices and press Enter to open the zDP Snapset Display panel:

   .                    SDM_VDG3 zDP Snapset Display              Row 1 to 69 of 209  .
   .                                                                                  .
   .  Command===>                                                                     .
   .  Primary Cmds: TR = Terminate Range   TI = Terminate Invalid                     .
   .     Line Cmds:  P = Set Persistence    L = Link        R = Restore               .
   .                 E = Reset Persistence  U = Unlink VDG  T = Terminate             .
   .                 S = Select             I = Make Secure                           .
   .    Source Cycle     Creation      Src Trk    Src Byte          Expiration        .
   .     Dev    Num    Date    Time   Chg   Uni  Chg    Uni State  Date     Time      .
   .  ******************************************************************************* .
   .  _ 0003CC   844 10/22/18 06:42    9K     0  513M     0 ACT                       .
   .  _ 0003CC   843 10/22/18 06:37    9K     0  513M     0 ACT                       .
   .  _ 0003CC   842 10/22/18 06:32    9K     0  513M     0 ACT                       .
   .  _ 0003CC   841 10/22/18 06:27    9K     0  513M     0 ACT                       .
   .  _ 0003CC   840 10/22/18 06:22    9K     0  513M     0 ACT                       .
   .  _ 0003CC   839 10/22/18 06:17    9K     0  513M     0 ACT                       .
   .  _ 0003CC   838 10/22/18 06:12    9K     0  513M     0 ACT                       .
   .  _ 0003CC   837 10/22/18 06:07    9K     0  513M     0 ACT                       .
   .  _ 0003CC   836 10/22/18 06:02    9K     0  513M     0 ACT                       .
   .  _ 0003CC   835 10/22/18 05:57    9K     0  513M     0 ACT                       .
   ...
   

The zDP Snapset Display panel shows snapsets and their status.

For detailed information about each option, press PF1 to access help.

Use this panel to:

• Link target set (L line command)
• Make snapset persistent (P line command) or not (E line command)
• Make snapset secure (I line command)
• Restore to source (R line command)
• Unlink target set (U line command)
• Terminate invalid snapsets (TI primary command)
• Terminate a snapset for all volumes in the VDG (T line command)
• Terminate range of snapsets (TR primary command)