Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bgp confederation peers

Specify the autonomous systems (ASs) that belong to the BGP confederation.

Syntax

bgp confederation peers as-number [ ...as-number]

To remove bgp confederation peers, use the no bgp confederation peer command.

Parameters

as-number	Enter the AS number. The range is 1 to 65535.
...as-number	(OPTIONAL) Enter up to 16 confederation numbers. The range is from 1 to 65535.

Defaults

Not configured.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The Autonomous Systems configured in this command are visible to the EBGP neighbors. Each Autonomous System is fully meshed and contains a few connections to other Autonomous Systems.

After specifying autonomous systems numbers for the BGP confederation, recycle the peers to update their configuration.

Related Commands

bgp confederation identifier — configures a confederation ID.