Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show cam pbr

Displaysthe PBR CAM content.

Syntax

show cam pbr {[interface interface] | stack—unit slot-number port-set number]} [summary]

Parameters

interface interface	Enter the keyword `interface` then the name of the interface.
stack–unit number	Enter the keyword `stack-unit` then the slot number. The range is from 0 to 11 .
port-set number	Enter the keywords `port-set` then the port-pipe number. The range is from 0 to 0.
summary	Enter the keyword `summary` to view only the total number of CAM entries.

Defaults

none

Command Modes

EXEC

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Added support for removing the Sonet interface on the MXL 10/40GbE Switch IO Module.
7.4.1.0	Introduced.

Usage Information

The show cam pbr command displays the PBR CAM content.

Example

Dell#show cam pbr stack-unit 0 po 0
                                             
                                             TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST, 
                                             Bit 1 - SYN, Bit 0 - FIN
                                             
                                             Cam Port VlanID Proto Tcp Src Dst  SrcIp  DstIp Next-hop  Egress
                                             Flag  Port  Port                                                              MAC               Port
                                             ------------------------------------------------------------
                                             00000 5 N/A IP   0x0  0  0 22.22.2.22/32 33.33.3.0/24  
                                             0:01:e8:8a:fd:76  0/0
                                             00001 5 N/A 145  0x0  0  0 0.0.0.0/0     44.4.4.4/32 
                                             00:01:e8:8a:fd:76 Vl 100(0/1)
                                             00002 5 N/A TCP  0x0  0  0 55.1.3.0/24   66.6.6.6/32
                                             00:01:e8:8a:fd:76 Po 128
                                             00003 5 N/A UDP  0x0  0  0 55.1.3.0/24   66.6.6.6/32
                                             00:01:e8:8a:fd:76 Po 128
                                             00004 5 N/A IP   0x0  0  0 0.0.0.0/0     0.0.0.0/0 
                                             00:01:e8:8a:fd:76 Vl 1020(Po 100)
                                             Dell#

Related Commands

ip redirect-group – applies a redirect group to an interface.
show ip redirect-list – displays the redirect-list configuration.
show cam-usage – displays the CAM usage on ACL, router, or switch.