Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

fip-snooping fc-map

Configure the FC-MAP value FIP snooping uses on all VLANs.

Syntax

fip-snooping fc-map fc-map-value

To return the configured FM-MAP value to the default value, use the no fip-snooping fc-map command.

Parameters

fc-map-value

Enter the FC-MAP value FIP snooping uses. The range is from 0EFC00 to 0EFCFF.

Defaults

0x0EFC00

Command Modes

CONFIGURATION
VLAN INTERFACE

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.