Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show logging

Display the logging settings and system messages logged to the internal buffer of the switch.

Syntax show logging [ number | history [reverse][ number] | reverse [ number] | summary]
Parameters
number (OPTIONAL) Enter the number of messages displayed in the output. The range is from 1 to 65535.
history (OPTIONAL) Enter the keyword history to view only information in the Syslog history table.
reverse (OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO (first in, first out) order.
summary (OPTIONAL) Enter the keyword summary to view a table showing the number of messages per type and per slot. Slots *7* and *8* represent RPMs.
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example (Partial)
Dell#show logging
                                             Syslog logging: enabled
                                             Console logging: level debugging
                                             Monitor logging: level debugging
                                             Buffer logging: level debugging, 311 Messages Logged, Size (40960 bytes)
                                             Trap logging: level informational
                                             Logging to 172.16.1.162
                                             Logging to 10.10.10.4
                                             Logging to 10.1.2.4
                                             Logging to 172.31.1.4
                                             Logging to 133.33.33.4
                                             May 22 10:21:10: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin
                                             May 22 10:16:35: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin
                                             May 22 09:39:12: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin
                                             May 22 09:03:56: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin
                                             May 22 09:01:51: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin
                                             May 22 08:53:09: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password authentication suc
                                             cess on vty0 ( 10.11.68.22 )
                                             May 22 08:53:04: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for user admin on vty0
                                             (10.11.68.22)
                                             May 19 16:58:32: %STKUNIT0-M:CP %SEC-5-LOGOUT: Exec session is terminated for user admin on line vty2
                                             (10.11.68.22)
                                             May 19 14:22:48: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty2 ( 10.11.68.22 )by admin
                                             May 19 12:05:43: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty2 ( 10.11.68.22 )by admin
                                             May 19 10:23:59: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.22 )by admin
                                             May 19 10:23:58: %STKUNIT0-M:CP %SEC-5-LOGOUT: Exec
                                             --More--
                                          
Example (History)
Dell#show logging history
                                             Syslog History Table: 1 maximum table entries,
                                             saving level warnings or higher
                                             SNMP notifications not Enabled
                                             May 22 08:53:09: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable
                                             password authentication success on vty0 ( 10.11.68.22 )
                                             Dell#
                                          

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\