Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

mac access-list extended

Name a new or existing extended MAC access control list (extended MAC ACL).

Syntax

mac access-list extended access-list-name [cpu-qos]

Parameters

access-list-name	Enter a text string as the MAC access list name, up to 140 characters.
cpu-qos	Enter the keyword `cpu-qos` to assign this ACL to control plane traffic only (CoPP).

Defaults

None

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The number of entries allowed per ACL is hardware-dependent. For detailed specifications on entries allowed per ACL, refer to your line card documentation.

Example

Dell(conf)#mac-access-list access-list extended TestMATExt
                                             Dell(config-ext-macl)#remark 5 IPv4
                                             Dell(config-ext-macl)#seq 10 permit any any ev2 eq 800 count bytes
                                             Dell(config-ext-macl)#remark 15 ARP
                                             Dell(config-ext-macl)#seq 20 permit any any ev2 eq 806 count bytes
                                             Dell(config-ext-macl)#remark 25 IPv6
                                             Dell(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count bytes
                                             Dell(config-ext-macl)#seq 40 permit any any count bytes
                                             Dell(config-ext-macl)#exit
                                             Dell(conf)#do show mac accounting access-list snickers interface g0/47 in
                                             Extended mac access-list snickers on TenGigabitEthernet 0/12
                                             seq 10 permit any any ev2 eq 800 count bytes (559851886 packets 191402152148bytes)seq 20 permit any any ev2 eq 806 count bytes
                                             
                                             (74481486 packets 5031686754bytes)seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets 797843521 bytes)

Related Commands

mac access-list standard — configures a standard MAC access list.

show mac accounting access-list — displays MAC access list configurations and counters (if configured).