Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bgp router-id

Assign a user-given ID to a BGP router.

Syntax

bgp router-id ip-address

To delete a user-assigned IP address, use the no bgp router-id command.

Parameters

ip-address

Enter an IP address in dotted decimal format to reset only that BGP neighbor.

Defaults

The router ID is the highest IP address of the Loopback interface or, if no Loopback interfaces are configured, the highest IP address of a physical interface on the router.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Peering sessions are reset when you change the router ID of a BGP router.