Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip route list

Display IP routes in an IP prefix list.

Syntax

show ip route list prefix-list

Parameters

prefix-list

Enter the name of a configured prefix list.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show ip route list test
                                             
                                             Codes:C- connected, S - static, R - RIP,
                                             B- BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
                                             O- OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
                                             N2- OSPF NSSA external type 2, E1 - OSPF external type 1,
                                             E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
                                             L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default,
                                             >- non-active route, + - summary route
                                             
                                             Gateway of last resort is not set
                                             
                                             Destination   Gateway             Dist/Metric Last Change
                                             -----------   -------             ----------- -----------
                                             R   2.1.0.0/24   via 2.1.4.1, Te 4/4   120/2       3d0h
                                             R   2.1.1.0/24   via 2.1.4.1, Te 4/4   120/2       3d1h
                                             R   2.1.2.0/24   via 2.1.4.1, Te 4/4   120/1       3d0h
                                             R   2.1.3.0/24   via 2.1.4.1, Te 4/4   120/1       3d1h
                                             C   2.1.4.0/24   Direct, Te 4/4          0/0       3d1h

Related Commands

ip prefix-list — enters CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list.

show ip prefix-list summary — displays a summary of the configured prefix lists.