Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug ip pim

View IP PIM debugging messages.

Syntax

debug ip pim [bsr | events | group | packet [in | out] | register | state | timer [assert | hello | joinprune | register]]

To disable PIM debugging, use the no debug ip pim command or use the undebug all to disable all the debugging commands.

Parameters

bsr	(OPTIONAL) Enter the keyword `bsr` to view PIM Candidate RP/BSR activities.
events	(OPTIONAL) Enter the keyword `group` to view PIM messages for a specific group.
group	(OPTIONAL) Enter the keyword `group` to view PIM messages for a specific group.
packet [in \| out]	(OPTIONAL) Enter the keyword `packet` to view PIM packets. Enter one of the optional parameters: `in`: to view incoming packets `out`: to view outgoing packets
register	(OPTIONAL) Enter the keyword `register` to view PIM register address in dotted decimal format (A.B.C.D).
state	(OPTIONAL) Enter the keyword `state` to view PIM state changes.
timer [assert \| hello \| joinprune \| register]	(OPTIONAL) Enter the keyword `timer` to view PIM timers. Enter one of the optional parameters: `assert`: to view the assertion timer `hello`: to view the PIM neighbor keepalive timer `joinprune`: to view the expiry timer (join/prune timer) `register`: to view the register suppression timer

Defaults

Disabled.

Command Modes

EXEC Privilege

Supported Modes

Full—Swtich

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.