Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

mac access-list standard

To configure a standard MAC ACL, name a new or existing MAC access control list (MAC ACL) and enter MAC ACCESS LIST mode.

Syntax

mac access-list standard mac-list-name

Parameters

mac-list-name

Enter a text string as the name of the standard MAC access list (140 character maximum).

Defaults

Not configured.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The Dell operating system supports one ingress and one egress MAC ACL per interface.

The number of entries allowed per ACL is hardware-dependent. For detailed specification about entries allowed per ACL, refer to your switch documentation.

The switch supports both ingress and egress ACLs.

Example

Dell(conf)#mac-access-list access-list standard TestMAC
                                             Dell(config-std-macl)#permit 00:00:00:00:00:00 00:00:00:00:ff:ff count
                                             Dell(config-std-macl)#deny  any count