Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip access-lists

Display all of the IP ACLs configured in the system, whether or not they are applied to an interface, and the count of matches/mismatches against each ACL entry displayed.

Syntax

show ip access-lists [ access-list-name] [interface interface] [in]

Parameters

access-list-name	Enter the name of a configured MAC ACL, up to 140 characters.
interface interface	Enter the keyword `interface` then the one of the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords `port-channel` then a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` then the slot/port information.
in	Identify whether ACL is applied on the ingress or egress side.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show ip access-lists  test  in 
                                 Standard Ingress IP access list test
                                 seq 5 permit 1.1.1.0/24 count (0 packets)
                                 seq 10 deny 2.1.1.0/24 count (0 packets)