Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip name-server

Enter up to six IPv4 addresses of name servers. The order you enter the addresses determines the order of their use.

Syntax

ip name-server ipv4-address [ ipv4-address2...ipv4-address6]

To remove a name server, use the no ip name-server ip-address command.

Parameters

ipv4-address	Enter the IPv4 address, in dotted decimal format, of the name server to be used.
ipv4-address2... ipv4-address6	(OPTIONAL) Enter up five more IPv4 addresses, in dotted decimal format, of name servers to be used. Separate the addresses with a space.

Defaults

No name servers are configured.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The system does not support sending DNS queries over a VLAN. DNS queries are sent out on all other interfaces, including the Management port.