Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

Using the Keyword no Command

To disable, delete or return to default values, use the no form of the commands.

For most commands, if you type the keyword no in front of the command, you disable that command or delete it from the running configuration. In this guide, the no form of the command is described in the Syntax portion of the command description. For example:

Syntax	`no {boot \| default \| enable \| ftp-server \| hardware \| hostname \| ip \| line \| logging \| monitor \| service \| io-aggregator broadcast storm-control \| snmp-server \| username}`
Defaults	None

Command Modes	CONFIGURATION
Supported Modes	All Modes

Command History

Version	Description
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.