Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

match ip next-hop

To match based on the next-hop IP addresses specified in an IP access list or IP prefix list, configure a filter.

Syntax

match ip next-hop {access-list | prefix-list prefix-list-name}

Parameters

access-list-name	Enter the name of a configured IP access list, up to 140 characters.
prefix-list prefix-list-name	Enter the keywords `prefix-list` and then enter the name of configured prefix list, up 10 140 characters.

Defaults

Not configured.

Command Modes

ROUTE-MAP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

match interface — redistributes routes that match the next-hop interface.

match ip address — redistributes routes that match an IP address.

match ip route-source — redistributes routes that match routes advertised by other routers.

match metric — redistributes routes that match a specific metric.

match route-type — redistributes routes that match a route type.

match tag — redistributes routes that match a specific tag.