Dell PowerEdge FC630 Owner's Manual

2.5-inch hard drive or SSD system

Table 1. Front panel features — 2.5-inch hard drive or SSD system Item 1 are the hot-swappable hard drives. Item 2 is the USB 3.0 port that allows you to connect USB devices to the system. Item 3 is the USB 2.0 or iDRAC managed USB port that allows you to connect USB devices to the system or provides access to the iDRAC Direct features. For more information, see the Integrated Dell Remote Access Controller User’s Guide at Dell.com/idracmanuals. The USB management port is USB 2.0-compliant. Item 4 is the iDRAC Direct LED indicator that manages the indicator lights when the iDRAC controls the USB1 port for management functions. Item 5 is the handle that is used to slide the server module out of the enclosure. Item 6 the status indicator that provides information about the status of the system. Item 7 is the power-on indicator or power button that glows when the system power is on. The power button controls the power supply output to the system. Item 7 is the handle that is used to slide the server module out of the enclosure.
Item	Indicator, Button, or Connector	Description
1	Hard drives or SSDs	2.5-inch hard drive system Two 2.5-inch hot-swap SAS or SATA hard drives or SAS or SATA or PCIe SSDs. NOTE: Use this button only if directed to do so by qualified support personnel or by the operating system's documentation.
2	USB 3.0 port	A USB device is connected to the system.
3	USB 2.0 or iDRAC Direct port	The USB management port can function as a regular USB port or provide access to the iDRAC features. For more information, see the Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
4	iDRAC Direct LED indicator	The management indicator lights when the iDRAC controls the USB1 port for management functions.
5	Sled handle	Used to slide the sled out of the enclosure.
6	Status indicator	Provides information about the status of the system.
7	Sled power-on indicator, power button	The power indicator turns on when the sled power is on. The power button controls the power supply unit output to the system.