Dell PowerEdge FC630 Owner's Manual

Installing a PCIe mezzanine card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: You must remove the PCIe mezzanine card to replace a faulty PCIe mezzanine card or service other components inside the system.

Follow the safety guidelines listed in safety instructions section..
Remove the PCIe mezzanine card. See the Removing the PCIe mezzanine card section.

Open the PCIe mezzanine card retention latch by pressing the release tab on the retention latch and lift the end of the latch.
If present, remove the connector cover from the PCIe mezzanine card bay.
CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
Align the two connectors on the PCIe mezzanine card with the connectors on the system board.
Press down the PCIe mezzanine card till the connectors on the card completely engage with the corresponding connectors.
The retention bracket on the side of the chassis latches onto the PCIe mezzanine card.
Close the retention latch.
Figure 1. Installing a PCIe mezzanine card
1. PCIe mezzanine card
2. PCIe mezzanine card retention bracket
3. PCIe mezzanine card connector (2)
4. PCIe mezzanine card retention latch

Follow the procedure listed in the After working inside your system section.

Bienvenue

Bienvenue dans l’univers Dell

Dell PowerEdge FC630 Owner's Manual

Installing a PCIe mezzanine card

Évaluez ce contenu