跳至主要內容
  • 簡單快速地下訂單
  • 檢視訂單及追蹤商品運送狀態
  • 建立並存取您的產品清單
  • 使用「公司管理」來管理您的 Dell EMC 網站、產品和產品層級連絡人。

Dell PowerEdge R760 Installation and Service Manual

Removing a 2 x 2.5-inch rear drive module cooling fan

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. Remove the 2 x 2.5-inch rear drive module air shroud.

Steps

Press the orange release tab and lift the rear drive module cooling fan to disconnect from the connector on the rear drive module.
Figure 1. Removing a 2 x 2.5-inch rear drive module cooling fan
This image shows removing the 2 x 2.5-inch rear drive module cooling fan.

對此內容評分

準確
實用
易懂
這篇文章對您有用嗎?
0/3000 characters
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  請給予評分 (1 到 5 顆星)。
  本文章是否有幫助?請選擇。
  評語中不得包含下列特殊字元:<>()\