Dell PowerEdge R760 Installation and Service Manual

Setting up the system

Perform the following steps to set up the system:

1. Unpack the system.
2. Install the system into the rack. For more information, see the rail installation and cable management accessory guides relevant to your rail and cable management solution at www.dell.com/poweredgemanuals.
3. Connect the peripherals to the system and the system to the electrical outlet.
4. Power on the system.
   For more information about setting up the system, see the Getting Started Guide that is shipped with your system.

   NOTE: For information about managing the basic settings and features of the system, see the Pre-operating system management applications chapter.