Dell Shared PowerEdge RAID Controller 8 Cards For Dell PowerEdge VRTX Systems User’s Guide

Installing the Shared PERC 8 Internal card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Align one end of the card with the card holder on the system board.
Lower the other end of the card into the card holder on the system board.
- CAUTION: Applying pressure on the heat sink or battery while seating the Shared PERC 8 Internal card may cause damage to the card. Use only the touch points to seat the card.
Press the touch points on the card and push the card until it is fully seated. When the card is fully seated, the release levers snap over the edge of the card.
- NOTE: Before closing the system, ensure that the release levers have snapped over the edge of the card.
Close the system.

Related tasks

Installing a new Shared PERC 8 Internal card

Related reference

Replacing a Shared PERC 8 Internal card