Dell Shared PowerEdge RAID Controller 8 Cards For Dell PowerEdge VRTX Systems User’s Guide

Updating firmware

Before you begin, download the Dell Update Package for the firmware.

Log in to the VRTX CMC.
Make sure that you turn off all the server modules.
Navigate to Storage and click the Update tab.
Browse to the location where you downloaded the file and select the new file.
Click Upload.
After the file transfer, select the check box next to the release version, and click Update.
- NOTE: Shared PERC8 firmware can only be updated from the VRTX Chassis Management Controller. The firmware DUP does not respond if it is run in Windows from a server.
- NOTE: The firmware upgrade may fail if the RAID controller in the system is performing an I/O background task (that is, consistency check, background initialization, rebuild, or reconstruction). Ensure that you allow the background task to complete before attempting to upgrade the firmware.
- NOTE: Patrol Read tasks are not affect a firmware upgrade.