Zu den Hauptinhalten

Dell Wyse 5070 Thin Client User Guide

Security screen options

Table 1. Security screen optionsSecurity screen options
Option	Description
Admin Password	This option enables you to set, change, or delete the administrator password. NOTE You must set the administrator password before you set the system or hard drive password. Also, deleting the administrator password automatically deletes the system password and the hard drive password. Successful password changes take effect immediately. By default, the administrator password is not set.
System Password	This option enables you to set, change, or delete the system password. NOTE Successful password changes take effect immediately. By default, the administrator password is not set.
Strong Password	This option enables you to enforce the option to always set strong passwords. By default, the Enable Strong Password option is not selected. NOTE If Strong Password is enabled, the administrator and system passwords must contain at least one uppercase character and one lowercase character. The password must be at least eight characters long.
Password Configuration	This option enables you to specify the minimum and maximum password lengths of the administrator and system passwords. min-4—By default, the minimum value is set to 4. You can increase the value. max-32—By default, the maximum value is set to 32. You can decrease the value.
Password Bypass	This option enables you to enable and disable the permission to bypass the system and the internal hard drive password, when they are set. The options are: Disabled—enabled by default Reboot Bypass
Password Change	This option enables you to enable the disable permission to the system and hard drive passwords when the administrator password is set. By default, the Allow Non-Admin Password Changes option is selected.
UEFI Capsule Firmware Updates	This option enables you to enable or disable UEFI Capsule Firmware. This option controls whether this system enables BIOS update through UEFI capsule update packages. This option is enabled by default.
TPM 2.0 Security	This option enables you to enable the Trusted Platform Module Technology feature. The options include: TPM On—enabled by default Clear PPI Bypass for Enable Commands Attestation Enable—enabled by default PPI Bypass for Disable Commands Key Storage Enable—enabled by default PPI Bypass for Clear Command SHA-256—enabled by default Disabled Enabled—selected by default
Chassis Intrusion	This option enables you to controls the chassis intrusion feature. The options include: Clear Intrusion Warning Disabled—enabled by default Enabled On-Silent
Admin Setup Lockout	This option enables you to prevent users from entering Setup when an administrator password is set.
SMM Security Mitigation	This option enables you to enable and disable additional UEFI SMM security mitigation protections.