Zu den Hauptinhalten

Dell Wyse 5070 Thin Client User Guide

System Configuration screen options

Table 1. System Configuration optionsSystem Configuration screen options
Option	Description
UEFI Network Stack	If the UEFI Network Stack option is enabled, the UEFI Networking Protocols are installed and allows pre-operating system and early operating system networking features to use any enabled NICs or SFP. The UEFI Network Stack option is enabled by default.
Integrated NIC	The Integrated NIC option controls the on-board LAN controller. The options include: Disabled—The internal LAN is off and not visible to the operating system. Enabled—The internal LAN is enabled. Enabled w/PXE—The internal LAN is enabled (with PXE boot). This option is enabled by default.
2nd NIC (RJ-45/SFP)	The second NIC (RJ-45/SFP) option controls the second on-board NIC. The options include: Disabled Enabled Enabled w/PXE—This option is enabled by default
Parallel Port	This option determines how the parallel port on the docking station operates. The options include: Disabled AT—enabled by default PS2 ECP
Serial Port1	This option determines how the serial port on the docking station operates. It allows you to avoid resource conflicts between devices by disabling or remapping the address. The options include: Disabled COM1—enabled by default COM2
SATA Operation	This option configures the operating mode of the integrated SATA hard drive controller. The options include: Disabled AHCI—enabled by default
Drives	Allows you to configure the SATA drives on board. SATA-0 enabled by default
SMART Reporting	This field controls whether the hard drive errors of integrated drives are reported during system startup.
USB Configuration	This is an optional feature. This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB Mass Storage Devices such as hard drives and USB keys. If the USB port is enabled, the device attached to this port is enabled and available for the operating system. If the USB port is disabled, the operating system cannot detect any device attached to this port. The options include: Enable USB Boot Support—enabled by default Enable Front USB Ports—enabled by default Enable Rear USB Ports—enabled by default NOTE USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
Front USB Configuration	This option enables or disables front USB ports. The options include: Front port Top—enabled by default Front port Bottom Medium—enabled by default Front port Top Medium—enabled by default Front port Bottom—enabled by default
Rear USB Configuration	This option enables or disables rear USB ports. The options are: Rear port Top Left—enabled by default Rear port Bottom Left—enabled by default Rear port Top Right—enabled by default Rear port Bottom Right—enabled by default
USB PowerShare	This option configures the USB PowerShare feature and allows you to charge external devices through the USB PowerShare port when system is off. This option is enabled by default.
Audio	This option enables or disables the integrated audio controller. By default, the Enable Audio option is selected. The options include: Enable Microphone—enabled by default Enable Internal Speaker—enabled by default