Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell EMC Configuration Guide for the S4048T–ON System 9.14.2.4

PDF

Supported Error Codes

Error codes denote problems in the network that has caused the mtrace query to fail.

These codes not only provide error information but also provide general information such as RP node reachability information.

The response data block filled in by the last-hop router contains a Forwarding code field. Forwarding code can be added at any node and is not restricted to the last hop router. This field is used to record error codes before forwarding the response to the next neighbor in the path towards the source. In a response data packet, the following error codes are supported:

Table 1. Supported Error CodesSupported Error Codes
Error Code Error Name Description
0x00 NO_ERROR No error
0x01 WRONG_IF Traceroute request arrived on the wrong interface. The router does not use this interface to forward packets to the source, group, and destination.
0x05 NO_ROUTE The router has no route for the source or group and cannot determine a potential route.
0x06 WRONG_LAST_HOP The router is not the proper last-hop router.
0x08 REACHED_RP Reached Rendezvous Point or Core.
0x09 RPF_IF Traceroute request arrived on the expected RPF interface for this source and group.
0x0A NO_MULTICAST Traceroute request arrived on an interface which is not enabled for multicast.
0x81 NO_SPACE There is not enough room to insert another response data block in the packet.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\