Dell EMC Configuration Guide for the S4048T–ON System 9.14.2.4

DHCP Relay When DHCP Server and Client are in Different VRFs

When the DHCP server and DHCP clients belong to different VRFs on the relay agent, you can configure the system to leak routes across VRFs.

You can configure the system to leak the following routes across VRFs:

• Connected routes
• The complete routing table
• Selective routes

The following illustration depicts the topology in which routes are leaked between VRFs in the relay agent.

                VRF_1                                        VRF_2
DHCP Server --------------------- DHCP relay agent --------------------------- Client
       (10.0.0.1)              (10.0.0.2)     (20.0.0.2)                     (20.0.0.4)