Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell EMC Configuration Guide for the S4048T–ON System 9.14.2.4

PDF

Configuring Set Conditions

To configure a set condition, use the following commands.

  • Add an AS-PATH number to the beginning of the AS-PATH.
    CONFIG-ROUTE-MAP mode
    set as-path prepend as-number [... as-number]
  • Generate a tag to be added to redistributed routes.
    CONFIG-ROUTE-MAP mode
    set automatic-tag
  • Specify an OSPF area or ISIS level for redistributed routes.
    CONFIG-ROUTE-MAP mode
    set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
  • Specify a value for the BGP route’s LOCAL_PREF attribute.
    CONFIG-ROUTE-MAP mode
    set local-preference value
  • Specify a value for redistributed routes.
    CONFIG-ROUTE-MAP mode
    set metric {+ | - | metric-value}
  • Specify an OSPF or ISIS type for redistributed routes.
    CONFIG-ROUTE-MAP mode
    set metric-type {external | internal | type-1 | type-2}
  • Assign an IP address as the route’s next hop.
    CONFIG-ROUTE-MAP mode
    set next-hop ip-address
  • Assign an IPv6 address as the route’s next hop.
    CONFIG-ROUTE-MAP mode
    set ipv6 next-hop ip-address
  • Assign an ORIGIN attribute.
    CONFIG-ROUTE-MAP mode
    set origin {egp | igp | incomplete}
  • Specify a tag for the redistributed routes.
    CONFIG-ROUTE-MAP mode
    set tag tag-value
  • Specify a value as the route’s weight.
    CONFIG-ROUTE-MAP mode
    set weight value

To create route map instances, use these commands. There is no limit to the number of set commands per route map, but the convention is to keep the number of set filters in a route map low. Set commands do not require a corresponding match command.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\