Dell PowerEdge R920 System Owner's Manual

Installing The Memory Riser And Fan Cage

1. Lift the cage using the handle and align the memory riser and fan cage with the guides on the side of the chassis.
2. Using the handle, lower the memory riser and fan cage into the system until it is firmly seated on top of the fan tray on the system board.
3. Slide back the cage handle to its position, so that the handle lock snaps in locked position.
4. Install memory risers.
5. If applicable, install the memory-riser blanks.
6. Install cooling fans.
7. Close the system.
8. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.