Dell PowerVault ME4 Series Storage System CLI Guide

PDF

sideplanes

This basetype is used by show enclosures.

Table 1. sideplanes properties
Name	Type	Description
durable-id	string	Sideplane ID.
enclosure-id	uint32	Enclosure ID.
drawer-id (5U84 enclosure)	uint8	0 : Top 1 : Bottom
drawer-id (2U12/24 enclosure)	uint8	Not applicable ( 255 ).
dom-id	uint32	The sideplane position, shown as an index value that starts at 0 and increments from left to right as viewed from the back of the enclosure.
path-id	string	A : Controller A. B : Controller B.
path-id-numeric	uint32	Numeric equivalents for path-id values. 0: B 1: A
name	string	Sideplane name.
location	string	Sideplane location.
position	string	Sideplane position, as viewed from the front of the enclosure. Left Right
position-numeric	uint32	Numeric equivalents for position values. 0: Left 1: Right
status	string	Sideplane status. Unsupported OK Critical Warning Unrecoverable Not Installed Unknown Unavailable
status-numeric	uint32	Numeric equivalents for status values. 0: Unsupported 1: OK 2: Critical 3: Warning 4: Unrecoverable 5: Not Installed 6: Unknown 7: Unavailable
extended-status	hex32	A numeric value that supplements the standard SES status shown by the status and status-numeric properties, and represents a specific condition. 0x01: Not powered 0x02: Cable fault 0x03: Other fault
health	string	OK Degraded Fault N/A Unknown
health-numeric	uint32	Numeric equivalents for health values. 0: OK 1: Degraded 2: Fault 3: Unknown 4: N/A
health-reason	string	If Health is not OK, the reason for the health state.
health-recommendation	string	If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component	Embedded; see unhealthy-component.
expander-details	Embedded; see expanders.