Dell PowerVault ME4 Series Storage System CLI Guide

PDF

set syslog-parameters


Description	Sets remote syslog notification parameters for events and managed logs. This allows events to be logged by the syslog of a specified host computer. Syslog is a protocol for sending event messages across an IP network to a logging server. This feature supports User Datagram Protocol (UDP) but not Transmission Control Protocol (TCP).
Minimum role	manage
Syntax	set syslog-parameters [host `address`] [host-ip `address`] [host-port `port-number`] notification-level crit\|error\|warn\|resolved\|info\|none
Parameters	[host `address`] Optional. The network address for the host. The value can be an IPv4 address, IPv6 address, or FQDN. If notification-level is other than none, the host parameter must be specified. [host-ip `address`] Deprecated—use the host parameter instead. [host-port `port-number`] Optional. A specific port number on the host. notification-level crit\|error\|warn\|resolved\|info\|none The minimum severity for which the system should send notifications: crit: Sends notifications for Critical events only. error: Sends notifications for Error and Critical events. warn: Sends notifications for Warning, Error, and Critical events. resolved: Sends notifications for Resolved, Warning, Error, and Critical events. info: Sends notifications for all events. none: Disables syslog notification. If notification-level is other than none, the host parameter must be specified.
Examples	Set the system to send an entry to the remote server at `10.1.1.10` on port `514` when a critical event occurs. # set syslog-parameters notification-level crit host 10.1.1.10 host-port
See also	show syslog-parameters test