Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show email-parameters


Description	Shows email (SMTP) notification parameters for events and managed logs.
Minimum role	monitor
Syntax	show email-parameters
Output	Email Notification Disabled: Email notification is disabled. Enabled: Email notification is enabled. Email Notification Filter Shows the minimum severity for which the system should send notifications: crit: Sends notifications for Critical events only. error: Sends notifications for Error and Critical events. warn: Sends notifications for Warning, Error, and Critical events. resolved: Sends notifications for Resolved, Warning, Error, and Critical events. info: Sends notifications for all events. none: Disables email notification. This is the default. If this option is specified, no other parameters are required and their current values are not changed. This parameter does not apply to managed-logs . Email Address (1–3) Shows up to three email addresses for recipients of event notifications. Log Destination Shows the email address for the log collection system used by the managed logs feature Security Protocol tls: Enables Transport Layer Security (TLS) authentication. The standard ports for TLS are 25 or 587. ssl: Enables Secure Sockets Layer (SSL) authentication. The standard port for SSL is 465. none: Do not use a security protocol. The standard port is 25. This setting is the system default. Server PortThe port on which the configured SMTP server is listening. This is either automatically configured to a default setting by the system, or has been overridden by the user. Email Server The IP address or domain name of the SMTP mail server to use for the email messages. Email Domain The domain name that, with the sender name, forms the “from” address for remote notification. Email Sender The sender name that, with the domain name, forms the “from” address for remote notification. Email Sender Password The sender password. For a configured sender, the password is represented by eight asterisks Include Logs Shows whether system log files will automatically be attached to email notification messages generated by the managed logs feature. This is the “push” mode for managed logs
Examples	Show settings for email notification. # show email-parameters
Basetypes	email-parameters status
See also	set dns-parameters set email-parameters show dns-parameters